Ricoh G-P3 Service Manual page 253

5. Service Tables
5507 [Supply Alarm]
5507 001 Paper Size
5507 003 Toner
5507 004 Maintenance Kit S
5507 005 Drum Life Remain S
5507 006 Waste Toner Bottle
5507 007 Tensya Supply Al
5
5507 128 Interval: Others
5507 133 Interval: A4
5507 134 Interval: A5
5507 142 Interval: B5
5507 164 Interval: LG
5507 166 Interval: LT
5507 172 Interval: HLT
[SC/Alarm Setting]
5515
Turns on or off the following SC alarm settings. These SP's are active when the CSS or
NRS is enabled.
5515 001 SC Call
5515 002 Service Parts Ne
5515 003 Service Parts En
5515 004 User Call
5515 006 Communication Te
252
When SP5-866-001 is set to "1", this SP is enabled.
*CTL Enables or disables the supply alarm.
[0 to 1 / 0 / -]
-
0: Off, 1: On
*CTL
Sets the paper supply alarm level. A paper supply
alarm counter increases by +1 when a sheet of the
*CTL
related size is used. The paper supply alarm occurs
when one of the paper supply alarm counters gets
*CTL
to the set value.
*CTL
[250 to 10000 / 1000 / 1/step]
The alert is sent to the e-mail address that is specified
*CTL
for the system administrator using a browser and
*CTL
the built-in web server (Web Image Monitor).
When SP5-866-001 is set to "1", this SP is enabled.
*CTL
*CTL [0 or 1 / 0 / - ] 0: OFF, 1: ON
This SP activates the service parts near end call.
*CTL
[0 or 1 / 0 / - ] 0: OFF, 1: ON
This SP activates the service parts end call.
*CTL
[0 or 1 / 0 / - ] 0: OFF, 1: ON
*CTL [0 or 1 / 1 / - ] 0: OFF, 1: ON
*CTL This SP activates the communication test call.