Ricoh G-P3 Service Manual page 203

5. Service Tables
[Glossy2: [FC]: LE] Transfer roller current and discharge plate voltage correction for the
2576
leading edge area of glossy paper 2 in color mode
2576 003 Separation
[Glossy2: [FC]: TE] Transfer roller current and discharge plate voltage correction for the
2578
trailing edge area of glossy paper 2 in color mode
2578 003 Separation
5
[OHP: [K]] Transfer roller current and discharge plate voltage for the image area of OHP
in B/W mode
2601
Unit -> T.Roll2: Transfer roller, Separa.: Discharge plate (paper separation)
2601 002 Transfer Roller2
2601 003 Separation
[OHP: [FC]] Transfer roller current and discharge plate voltage for the image area of
2606
OHP in color mode
2606 005 Transfer Roller2
2606 006 Separation
[OHP: [K]: LE] Transfer roller current and discharge plate voltage correction for the
2621
leading edge area of OHP in B/W mode
2621 002 Transfer Roller2
2621 003 Separation
202
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
*EGB
these SP's values. For example, "20%" on the LCD
actually means 100%.
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
*EGB
these SP's values. For example, "20%" on the LCD
actually means 100%.
Adjusts the transfer roller current.
*EGB
[0 to 100 / 7.5 / 0.1 -µA /step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
Adjusts the transfer roller current.
*EGB
[0 to 100 / 21.3 / 0.1 -µA /step
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2 / 0.1 -KV/step]
*EGB
[0 to 400 / 100 / 5%/step]
*EGB