Ricoh G-P3 Service Manual page 231

5. Service Tables
3032 [Vcnt Response] DFU
3032 001 [K]
3032 002 [M]
3032 003 [C]
3032 004 [Y]
3032 005 Max
3032 006 Min
5
3041 [Vtref] Vtref Setting ([Color])
3041 001 Lower Limit: [K]
3041 002 Lower Limit: [M]
3041 003 Lower Limit: [C]
3041 004 Lower Limit: [Y]
3041 005 Upper Limit: [K]
3041 006 Upper Limit: [M]
3041 007 Upper Limit: [C]
3041 008 Upper Limit: [Y]
3042 [Vtref] Vtref Correction Setting ([Color]) DFU
3042 001 Mode
3042 002 Step [K]
3042 003 Step [M]
3042 004 Step [C]
230
*EGB
Adjusts the Vcnt correction coefficient for each
*EGB
color.
*EGB
[1.00 to 5.00 / 3.71 / 0.01 V/step]
*EGB
Adjusts the maximum Vcnt correction coefficient.
*EGB
[1.00 to 5.00 / 4.30 / 0.01 V/step]
Adjusts the minimum Vcnt correction coefficient.
*EGB
[1.00 to 5.00 / 3.50 / 0.01 V/step]
*EGB
*EGB
Sets the lower limit Vtref voltage for each color.
[0.10 to 5.00 / 1.60 / 0.01 V/step]
*EGB
*EGB
*EGB DFU
*EGB
Sets the maximum limit Vtref voltage for each color.
*EGB
[0.10 to 5.00 / 3.50 / 0.01 V/step]
*EGB
Sets the Vtref correction.
*EGB [0 or 1 / 0 / -] Alphanumeric
0: On, 1: Off
*EGB
Adjusts the Vtref correction step for each color.
*EGB
[0.00 to 1.00 / 0.10 / 0.01 V/step]
*EGB