Ricoh G-P3 Service Manual page 266

5839 [IEEE 1394]
5839 007 Cycle Master
5839 008 BCR mode
5839 009 IRM 1394a Check
5839 010 Unique ID
5839 011 Logout
5839 012 Login
5839 013 Login MAX
5840 [IEEE 802.11]
5840 006 Channel MAX
5840 007 Channel MIN
[0 or 1 / 1 /-]
*CTL
0: Off, 1: On
[0 to 3 / 3 / 1/step]
*CTL 0: Standard, 1: IRM Color Copy
2: Reserved, 3: Always Effective
[0 or 1 / 0 /-]
*CTL
0: Off, 1: On
[0 or 1 / 1 /-]
*CTL
0: Off, 1: On
[0 or 1 / 1 /-]
*CTL
0: Off, 1: On
[0 or 1 / 0 /-]
*CTL
0: Off, 1: On
*CTL [0 to 63 / 8 / 1/step]
Sets the maximum number of channels available for
data transmission via the wireless LAN. The number
of channels available varies according to location.
The default settings are set for the maximum end of
*CTL
the range for each area. Adjust the upper 4 bits to
set the maximum number of channels.
EU: [1 to 13 / 13 / 1/step]
NA/ AS: [1 to 11 / 11 / 1/step]
Sets the minimum number of channels available for
data transmission via the wireless LAN. The number
of channels available varies according to location.
The default settings are set for the minimum end of
*CTL
the range for each area. Adjust the lower 4 bits to
set the minimum number of channels.
EU: [1 to 13 / 1 / 1/step]
Service Mode Table
5
265