Ricoh G-P3 Service Manual page 169

5. Service Tables
1917 025 GL:L:Temp. Inc.
SP2-XXX (Drum)
[Color Regist.] Color Registration Correction
([Color], M: Main scan, S: Sub scan)
2101 You can adjust these SPs if the color registration is not good after the Line Position
Adjustment (also known as 'MUSIC') is done. The [K] value (-001) is the standard value
in the main scan adjustment. The values other than [k] value are added to [K] value. So,
5
[K] value normally does not need to be adjusted in the main scan adjustment.
2101 001 [K]: M Regist. Dot
2101 002 [M]: M Regist. Dot
2101 003 [C]: M Regist. Dot
2101 004 [Y]: M Regist. Dot
2101 005 [K]: M Reg. SubD
2101 006 [K-M]: M Reg. SubD
2101 007 [K-C]: M Reg. SubD
2101 008 [K-Y]: M Reg. SubD
2101 013 [K-M]: S Reg. 600
2101 014 [K-C]: S Reg. 600
2101 015 [K-Y]: S Reg. 600
2101 016 [K-M]: S Reg. 1200
2101 017 [K-C]: S Reg. 1200
2101 018 [K-Y]: S Reg. 1200
2102 [Magnifi. Adj.] Magnification Adjustment
168
[-50 to 0 / 0 / 1deg /step]
Adjusts the temperature increase for glossary
paper at low temperature.
*EGB
[0 to 30 / 7 / 1deg /step]
*EGB
Adjusts the side edge registration by a dot for each
*EGB
mode.
*EGB
[-128 to 127 / 0 / 1 dot/step]
*EGB
*EGB
*EGB
Adjusts the side edge registration by 1/16 dot.
[-15 to 15 / 0 / 1sub-dot/step]
*EGB
*EGB
*EGB
*EGB
*EGB
[-128 to 127 / 0 / 1 line/step]
*EGB
*EGB
*EGB