Ricoh G-P3 Service Manual page 198

2496 012 RS: 2nd:Separa.
[Glossy2:[FC]:LE] Transfer roller current and discharge plate voltage correction for the
trailing edge area of glossy paper 2 in color mode
2498
Paper Side: 1st or 2nd
2498 007 LS: 1st: T.Roll2
2498 012 LS: 2nd:Separa.
[Thick: [K]] Transfer roller current and discharge plate voltage for the image area of thick
paper 1 in B/W mode
2501
Paper Side: 1st or 2nd
Unit -> T.Roll2: Transfer roller, Separa.: Discharge plate (paper separation)
2501 007 T. Roll 2: 1st
2501 008 Separation: 1st
2501 012 T. Roll 2: 2nd
2501 013 Separation: 2nd
[Thick: [FC]] Transfer roller current and discharge plate voltage for the image area of
thick paper 1 in color mode
2506
Paper Side: 1st or 2nd
2506 013 T. Roll 2: 1st
2506 014 Separation: 1st
2506 021 T. Roll 2: 2nd
2506 022 Separation: 2nd
The value displayed on the LCD is different from
these SP's values. For example, "20%" on the LCD
*EGB
actually means 100%.
*EGB [0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
these SP's values. For example, "20%" on the LCD
*EGB
actually means 100%.
Adjusts the transfer roller current.
*EGB
[0 to 100 / 9.2 / 0.1 -µA /step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
*EGB [0 to 100 / 12.3 / 0.1 -µA /step]
*EGB [0 to 4 / 2.0 / 0.1 -KV/step]
Adjusts the transfer roller current.
*EGB
[0 to 100 / 12.3 / 0.1 -µA /step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
*EGB [0 to 100 / 18.3 / 0.1 -µA /step]
*EGB [0 to 4 / 2.0 / 0.1 -KV/step]
Service Mode Table
5
197