Ricoh G-P3 Service Manual page 277

5. Service Tables
5860 019 Mail Keep Setting
5860 020 ParMail Rec TOut
5860 021 MDN Res RFC2298
5
5860 022 SMTP Aut FileldRep
5860 025 SMTP Auth DirectSet
S/MIVE: MIME Header
5860 026
Setting
276
Sets the way of keeping the e-mail in the server.
[0 to 2 / 0 / 1/step]
*CTL 0: Not keeping
1: Keeping All
2: Keeping the only error e-mail
Adjusts the time for keeping the partial e-mails. If
the partial e-mails are not received during the set
*CTL
time, these are deleted.
[1 to 168 / 72 / 1 h/step]
Determines whether RFC2298compliance is
switched on for MDN reply mail.
*CTL
[0 or 1 / 1 / -]
0: No, 1: Yes
Determines whether the FROM item of the mail
header is switched to the validated account after
the SMTP server is validated.
*CTL
[0 or 1 / 0 / 1/step]
0: No. "From" item not switched,
1: Yes. "From" item switched.
Selects directly the way of SMTP authentication if
all SMTP authentications fail due to the error in the
SP5860-006.
This SP is activated only when SP5860-003 is set
to "Enable".
*CTL
Bit switch 0: LOGIN
Bit switch 1: PLAIN
Bit switch 2: CRAM MD5
Bit switch 3: DIGEST MD
Bit switch 4 - 7: Not used
Selects the MIME header type of an E-mail sent by
S/MIME.
[0 to 2 / 0 / 1]
*CTL
0: Microsoft Outlook Express standard
1: Internet Draft standard