Ricoh G-P3 Service Manual page 151

5. Service Tables
1001 047 Tray4:Normal:RS
1001 048 Tray4:Thick
1001 049 Tray4:OHP
1001 050 Tray4:Normal2:LS
1001 051 Tray4:Normal2:RS
1001 052 Tray4:Thick2
1001 053 Tray4:Thin:LS
1001 054 Tray4:Thin:RS
1001 055 Tray4:Special
5
1002 [S-to-S Reg.] Side-to-Side Registration
1002 001 By-pass
1002 002 Tray 1
1002 003 Tray 2
1002 004 Tray 3
1002 005 Duplex
1002 006 Tray4
[Paper Buckle] Paper Buckle
(Tray or By-pass, Paper Type, Process Speed)
1003
Paper Type ->N: Plain paper 1, N2 or Normal 2: Plain paper 2, Thick2: Thick paper 2
(see the Specifications table for details on these paper weights)
Process Speed-> LS: Low speed, RS: Regular speed
1003 001 Tray 1: Normal: LS
1003 002 Tray 1: Normal: RS
1003 003 Tray 1: Thick
1003 004 Tray 1: OHP
1003 005 Tray 2: Normal: LS
150
*EGB [-10.0 to 10.0 / -3.0 / 0.1 mm/step]
*EGB [-10.0 to 10.0 / 1.5 / 0.1 mm/step]
*EGB [-10.0 to 10.0 / 0.0 / 0.1 mm/step]
*EGB [-10.0 to 10.0 / 1.0 / 0.1 mm/step]
*EGB [-10.0 to 10.0 / 1.0 / 0.1 mm/step]
*EGB [-10.0 to 10.0 / 1.5 / 0.1 mm/step]
*EGB [-10.0 to 10.0 / 0.0 / 0.1 mm/step]
*EGB [-10.0 to 10.0 / 0.0 / 0.1 mm/step]
*EGB [-10.0 to 10.0 / 1.5 / 0.1 mm/step]
*EGB
*EGB
Adjusts the side-to-side registration for each
*EGB
mode. This SP changes the laser main scan start
position.
*EGB
[-10.0 to 10.0 / 0.0 / 0.1 mm/step]
*EGB
*EGB
*EGB
*EGB
Adjusts the amount of paper buckle at the
registration roller for each mode. This SP
*EGB
changes the paper feed timing.
*EGB
[-10.0 to 10.0 / 0.0 / 0.1 mm/step]
*EGB