Ricoh G-P3 Service Manual page 264

5824 [NVRAM Upload]
5824 001 NVRAM Upload
5825 [NVRAM Download]
5825 001 NVRAM Download
5828 [Network Setting] Job spool settings/ Interface selection for Ethernet and wireless LAN
5828 050 1284 Compatible
5828 052 ECP
5828 065 Job Spool
5828 066 HD job Clear
5828 069 Job Spool (Protocol)
Uploads the UP and SP mode data (except for
# counters and the serial number) from the NVRAM
to an SD card.
Downloads the UP and SP mode data from an SD
#
card to the NVRAM.
Switches Centronics IEEE1284 compatibility on/
off for the network.
[ 0 or 1 / 1 / - ]
0: Disabled, 1: Enabled
*CTL
• Selecting "0" disables bi-directional data
transmission.
Switches the ECP setting for Centronics off/on.
[0 or 1 / 1 / -]
0: Disabled, 1: Enabled
*CTL
• With "1" selected, SP5-828-050 must be
enabled for 1284 mode compatibility.
Switches the job spool on/off.
*CTL [0 or 1 / 0 / -]
0: Disabled, 1: Enabled
Selects the treatment of the job when a spooled job
exists at power on.
*CTL
[0 or 1 / 1 / 1/step]
0: Data is cleared, 1: Automatically printed
Switches job spooling off or on and enables settings
for job spooling protocols.
*CTL
[0 or 1 / 1 / 1/step]
Service Mode Table
5
263