Ricoh G-P3 Service Manual page 241

5. Service Tables
3551 005 Job End 3: [K]
3551 006 Job End 3: [Cl]
3553 [PC SelfChk]
3553 001 Idle Time
3554 [Pow. ON SelfChk] Power On Self-check
5
3554 001 Time
3554 002 Temp./ Humidity
3554 003 Time 2
3554 004 Temp./ Humidity 2
3555 [S.Chk Stand-by] Process Control Self-check Stand-by Time
3555 001
3556 [Image Process.] Display the Time of Last Image Processing
3556 001 Time (Year)
240
*EGB In the middle of a job, printing stops and process
control is done if the number of pages in the job gets
to this number.
*EGB
[0 to 2000 / 500 / 1 page/step]
Adjusts the threshold time for the self check without
the machine operation.
*EGB
[0 to 24 / 6 / 0.1 Hour/step]
Adjusts the threshold (Time) of the process control
from turning the power on.
*EGB
[0 to 24 / 6.0 / 0.1 H/step]
Adjusts the threshold (Temperature/ Humidity) of
the process control.
*EGB
[0 to 100 / 6 / 0.1 g/m
Adjusts the threshold (Time) for developer mixing
after turning the power on.
*EGB
[0 to 200.0 / 36.0 / 0.1 H/step]
Adjusts the threshold (Temperature/ Humidity) for
developer mixing after turning the power on.
*EGB
[0 to 100 / 6.0 / 0.1 g/m
Waiting time for the next job command after job
end. If the next job command comes before this
interval expires, the "JOB END 1" process control
*EGB
is not done. (SP3551 001 and 002)
[0 to 30 / 0 / 1 /sec]
*EGB [0 to 99 / 0 / 1 year/step]
3
/step]
3
/step]