Ricoh G-P3 Service Manual page 170

Color, M Magnifi.: Main scan magnification
Adjusts the main scan magnification correction for each color.
2102 001 [K]:M Magnifi.
2102 002 [M]:M Magnifi.
2102 003 [C]:M Magnifi.
2102 004 [Y]:M Magnifi.
2102 005 PLL
[Trim Adjust.] Erase Margin Adjustment
2103
Lead Ed: Leading Edge, Trail. Ed: Trailing Edge, Left/Right Ed: Left/ Right Edge
2103 001 Lead Ed. Width
2103 002 Trail. Ed. Width
2103 003 Left Ed. Width
2103 004 Right Ed. Width
2103 005 Lead Ed.Width/SP1
[Magnifi. Adj.] Magnification Adjustment
2104
([Color], Main Scan Magnification)
2104 001 [K]: M Magnifi.
*EGB
*EGB
[-1.00 to 1.00 / 0.000 / 0.001 %/step]
*EGB
*EGB
Adjusts the PLL (phase lock loop).
*EGB
[-1.0 to 1.0 / 0.0 / 0.1 %/step]
Adds this value to the leading edge erase margin
position in the sub scan direction.
*EGB
[-127 to 127 / 71 / 1 line/step]
Adds this value to the trailing edge erase margin
position in the sub scan direction.
*EGB
[-127 to 127 / 71 / 1 line/step]
Adds this value to the left edge erase margin
position in the main scan direction.
*EGB
[-127 to 127 / 47 / 1 dot/step]
Adds this value to the right edge erase margin
position in the main scan direction.
*EGB
[-127 to 127 / 47 / 1 dot/step]
Adds this value to the leading edge erase margin
position in the sub scan direction for special paper
*EGB
or thin paper.
[-127 to 127 / 95 / 1 line/step]
*EGB
Adjusts the main scan magnification.
Service Mode Table
5
169