Ricoh G-P3 Service Manual page 255

5. Service Tables
5801 018 SRM Memory Clr
5801 019 LCS
5802 [Engine Free Run]
5802 001
5
5803 [Input Check]
See 'Input Check Table'
5804 [Output Check]
See 'Output Check
Table'
5808 [Destination] Destination Code Display
5808 001 Destin. Code Disp
5810 [Fusing SC Reset]
5810 001 Fusing SC Reset
5811 [Serial No.] Machine Serial No. Setting
5811 001 Setting
254
- Resets or deletes the SRM-related data.
- Resets or deletes the LCS-related data.
Performs a free run on the printer engine.
• The machine starts free run in the same
condition as the sequence of A4/LT printing
from the 1st tray. Therefore, paper should be
loaded in the 1st tray, but paper is not fed.
• The main switch has to be turned off and on
after using the free run mode for a test.
Displays the destination code.
[0 to 4 / 0 / 1/step] Alphanumeric
*EGB
0: DOM (Japan), 1: OTHER, 2: ASIA
3: ERP (Europe). 4: USA
Resets a type A service call condition. Turn the main
power switch off and on after resetting the SC code.
*EGB [SSP]