Ricoh G-P3 Service Manual page 122

SC
Symptom
[Level]
2. Turn off the DESS module function.
Log Data Error 3
003
• Invalid encryption key log due to defective NVRAM data
[D]
1. Initialize the HDD with SP5832-004.
2. Disable the log encryption setting.
Log Data Error 4
004
• Unusual encryption function log due to the defective NVRAM data
[D]
1. Initialize the HDD with SP5832-004.
Log Data Error 5
005
• NVRAM or HDD, which is used in other machine, is installed.
[D]
1. Reinstall the previous NVRAM or HDD.
2. Initialize the HDD with SP5832-004.
Log Data Error 99
099
• Other than above causes
[D]
1. Ask your supervisor.
HDD Data Overwrite Security SD card error
The all delete cannot be
877
executed even though the
[B]
Data Overwrite Security Unit
(B735) is installed and
activated.
Electric counter error
900
Abnormal data is stored in the
[D]
counters.
Possible Cause/Required Action
• Defective SD card (B735)
• Not installed SD card (B735)
1. Replace the NVRAM and then install the new SD
card (B735).
2. Check and reinstall the SD card (B735).
• Defective NVRAM
• Defective controller
1. Turn the main switch off and on.
2. Check the connection between the NVRAM and
controller.
3. Replace the NVRAM.
Service Call Conditions
4
121