Ricoh G-P3 Service Manual page 278

5866 [E-Mail Report]
5866 001 Report Validity
5866 005 Add DataFiled
5869 [RAM Disk Setting]
5869 001 Mail Function
5870 [Common Key Info Writi] Common Key Information Writing
5870 001 Writing
5870 003 Initialize
5873 [SD Card Appli Move]
5873 001 Move Exec
5873 002 Undo Exec
5878 [Option Setup]
5878 001 Data Overwrite Security
5878 002 HDD Encryption
2: RFC standard
Disables and re-enables the email notification
feature.
*CTL
[0 or 1/ 0 / 1/step]
0: Enable, 1: Disable
Enables or disables to add the date field on the alert
notice e-mail.
*CTL
[0 or 1 / 0 / 1/step]
0: Off, 1: On
Enables or disables the e-mail transfer function. This
SP sets the RAM disk size for the e-mail transfer
function.
*CTL#
[0 or 1 / 0 / 1/step]
0: On, 1: Off
Writes the authentication data (used for NRS) in the
*CTL
memory.
*CTL Initializes the authentication data in the memory.
See 'SD Card Appli Move'.
See 'SD Card Appli Move'.
Executes the setup for the Data Overwrite Security
Unit.
Executes the setup for the HDD Encryption Unit.
Service Mode Table
5
277