Ricoh G-P3 Service Manual page 296

7934 019 Near End
7934 020 Install Date
7934 021 Toner End Date
[PM Interval] Preventive Maintenance Interval
7935
(Sheets or Rotations, Unit)
7935 004 R: Trans. Belt
7935 005 S: Fusing
7935 006 R: Fusing
7936 [PM Count. Reset] Preventive Maintenance Counter Reset
7936 001 All
[TonerLog1 [K]] Toner Bottle Log Data 1 [K]
7941
(R: Replacement or E: End)
7941 001 S/N
[0 to 9999999 / 0 / 1/step]
Displays the toner near end record.
*EGB
[0 to 3 / 0 / 1/step]
*EGB Displays the date of the install the toner bottle.
*EGB Displays the date of the toner end.
*EGB [0 to 500.00 / 106.32 / 0.01 Km/step]
*EGB [0 to 255 / 100 / 1 K/step]
*EGB [0 to 200.00 / 170.54 / 0.01 Km/step]
Resets the following SP counters.
• SP3251-001 to -004
• SP3303-001 to -004
• SP3821-001 to -010
• SP7931-001 to -021
• SP7932-001 to -021
• SP7933-001 to -021
• SP7934-001 to -021
• SP9001-001 to -024
• SP9001-029 to -032
• SP9001-059 to -061
• SP9001-075 to -077
• SP9901-001, 002
• SP9914-005 to -006
*EGB Displays the serial number of the previous bottle.
Service Mode Table
5
295