Ricoh G-P3 Service Manual page 252

5404 001 User Code Clear]
5501 [PM Alarm Interval] PM Alarm Interval
5501 001 Printout
5504 [Jam Alarm]
5504 001 Jam Alarm
5505 [Error Alarm]
5505 001 Error Alarm
- Clears all counters for users.
Sets the PM alarm Interval. [0 to 9999 / 0 / 1k
prints/step]
The alert is sent to the e-mail address that is specified
for the system administrator using a browser and
*CTL
the built-in web server (Web Image Monitor).
0: Disables the PM alarm
When SP5-866-001 is set to "1", this SP is enabled.
Sets the jam alarm level. If a paper jam occurs, the
jam alarm counter increases by +1. If no paper jam
occurs while the set number of paper is output, the
jam alarm counter decreases by -1. The jam alarm
occurs when the jam alarm counter gets to +10.
[0 to 3 / 3 / 1/step]
*CTL
0: Disables the jam alarm
1: 1.5K, 2: 3K, 3: 6K
The alert is sent to the e-mail address that is specified
for the system administrator using a browser and
the built-in web server (Web Image Monitor).
When SP5-866-001 is set to "1", this SP is enabled.
Sets the error alarm level. If an SC code occurs, the
error alarm counter increases by +1. If no SC code
occurs while the set number of paper is output, the
jam alarm counter decreases by -1. The error alarm
occurs when the error alarm counter reaches +5.
*CTL
[0 to 255 / 30 / 1/step]
0: Disables the PM alarm
The alert is sent to the e-mail address that is specified
for the system administrator using a browser and
the built-in web server (Web Image Monitor).
Service Mode Table
5
251