Table of Contents
Advertisement
Printer Installation
Installation Procedure
• Remove the tape from the development units before you turn the main switch on. The development
units can be severely damaged if you do not remove the tape.
• Keep the shipping retainers after you install the machine. You may need them in the future if you
transport the machine to another location.
Unpacking
• When lifting the machine, use the inside grips on both sides of the machine.
• If not, the machine could be dropped. This may cause an injury and may damage the machine.
• Place no objects to the left or on the cover.
1. Remove the plastic bag.
2. Lift the machine with two people by using the inset grips on both sides of the machine.
• Do not remove the tapes before placing the machine.
• Lower the machine slowly and carefully, so as not to pinch your hands.
3. Remove the tape from the printer.
Printer Installation
1
15
Advertisement
Table of Contents
Troubleshooting
