Ricoh G-P3 Service Manual page 185

5. Service Tables
2204 021 Environ. : LL: [K]
2204 022 Environ. : LL: [M]
2204 023 Environ. : LL: [C]
2204 024 Environ. : LL: [Y]
[Dev. Bias: DC] Development Bias: DC
(Process Speed, [Color]) Process Speed -> RS: Regular speed, LS: Low speed
2212
These SPs adjust the development bias. These are used only when SP3-501-001 is set
to "1".
2212 001 RS: [K]
5
2212 002 RS: [M]
2212 003 RS: [C]
2212 004 RS: [Y]
2212 005 LS: [K]
2212 006 LS: [M]
2212 007 LS: [C]
2212 008 LS: [Y]
2251 [Manual Toner] Forced Toner Supply Execution
2251 001 [K]
2251 002 [M]
2251 003 [C]
2251 004 [Y]
2252 [Forced Toner] Forced Toner Supply Execution
2252 001 Repeat: [K]
2252 002 Repeat: [M]
2252 003 Repeat: [C]
184
*EGB [0 to 255 / 202 / 1/step]
*EGB [0 to 255 / 194 / 1/step]
*EGB [0 to 255 / 195 / 1/step]
*EGB [0 to 255 / 190 / 1/step]
*EGB
*EGB
*EGB
*EGB
[50 to 800 / 350 / 1 V/step]
*EGB
*EGB
*EGB
*EGB
Manually executes toner supply for each color.
The toner supply procedure is done specified times
with SP2252 (supplied for one second on and one
second off).
Adjusts the toner supply times for SP2251.
[0 to 30 / 8 / 1 time/step]