Ricoh G-P3 Service Manual page 162

1105 074 ENV: Simple: [FC] RS
1105 075 GL: Simple: [K] LS
1105 076 GL: Duplex: [K] LS
1105 077 GL: Simple: [FC] LS
1105 078 GL: Duplex: [FC] LS
1105 089 OHP: [K]: LS
1105 090 OHP: [FC]: LS
1105 091 TK2: Duplex: [K]
1105 092 TK2: Duplex: [FC]
[Fusing Temp.] Fusing Temperature
1106
H. Roller: Heat Roller
1106 002 H. Roller Temp.
1159 [Fusing JAM SC] Fusing JAM SC Setting
1159 001 Fusing JAM SC
[Print Speed Ctl] Print Speed Control for small paper sizes (A5 or smaller)
(Sheets of paper, Interval time or Temperature, Process Speed)
1911 Simple [one-sided] or Duplex
Process Speed -> LS: Low speed, RS: Regular speed
See section 6 for more about these SPs.
1911 001 PPM Down: RS: S
1911 002 PPM Down: LS: S
*EGB
*EGB
[120 to 180 / 155 / 1deg /step]
*EGB
*EGB
[120 to 180 / 155 / 1deg /step]
*EGB
*EGB
[120 to 180 / 160 / 1deg /step]
*EGB
*EGB
[120 to 180 / 150 / 1deg /step]
*EGB
Displays the heating roller temperature at this time.
[0 to 230 / 0 / 1deg /step]
Turns on or off the fusing jam SC to detect the three
consecutive paper jams at fusing unit.
[0 or 1 / 0 / 1 /step]
*EGB
0: OFF
1: ON
*EGB The print speed (PPM) is reduced after the machine
has printed this number of pages continuously.
*EGB
[0 to 99 / 15 / 1 sheet/step]
Service Mode Table
5
161