Ricoh G-P3 Service Manual page 302

8024 [P: Pjob/LS]
8027 [O: Pjob/LS]
The number of times the application program stores data on the document server
[0 to 9999999/ 0 / 1]
• When images stored on the document server by a network application (including Palm 2), are printed
with another application, the O: counter increments.
8031 [T: Pjob/DesApl]
8034 [P: Pjob/DesApl
8037 [O: Pjob/DesApl]
The number of times the application program retrieves data from the document server
[0 to 9999999/ 0 / 1]
• When documents already stored on the document server are printed, the counter of the application
program that executes the print job increases.
8061 [T: FIN Jobs]
8064 [P: FIN Jobs]
8067 [O: FIN Jobs]
The number of times the application program uses the finisher
[0 to 9999999/ 0 / 1]
001 Sort
002 Stack
003 Staple
004 Booklet
*CTL
/ Local storage; document server
*CTL
*CTL
*CTL Print job/ Designated application program
*CTL
*CTL
*CTL Finish, post-print processing jobs
*CTL
The number of times the application program starts the sort
mode
The number of times the application program starts the stack
mode
The number of times the application program starts the staple
mode
The number of times the application program starts the booklet
mode
• The counter of the staple mode (003) can also increase.
Service Mode Table
5
301