Ricoh G-P3 Service Manual page 154

[Mt Speed] Drive Motor Speed DFU
(Unit, Process Speed, Paper Type)
Paper Type
(see the Specifications table for details on these paper weights)
1004
Process Speed
CW: Clockwise, CCW: Counterclockwise
PFU: Optional paper tray unit
1004 001 DEV / OPC [K]: LS
1004 002 DEV / OPC [K]: RS
1004 003 DEV [CMY]: LS
1004 004 DEV [CMY]: RS
1004 005 OPC [CMY]: LS
1004 006 OPC [CMY]: RS
1004 007 Fusing: LS
1004 008 Fusing: RS
1004 009 Transfer Belt: LS
1004 010 Transfer Belt: RS
1004 011 PFU: LS
1004 012 PFU: RS
1004 013 Duplex: LS: Add
1004 014 Duplex: RS: Add
1004 015 Duplex: LS
1004 016 Duplex: RS
1004 017 Reverse: LS: CW
1004 018 Reverse: RS: CW
N: Plain paper 1, N2 or Normal 2: Plain paper 2, Thick2: Thick paper 2
LS: Low speed, RS: Regular speed
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
Adjusts the black development and OPC motor
speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
Adjusts the color development motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
Adjusts the color OPC motor speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
Adjusts the paper exit and fusing motor speed.
[-4.00 to 4.00 / 0.95 / 0.01%/step]
Adjusts the transfer belt motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
Adjusts the speed of the feed motor in the
optional paper tray unit.
[-4.00 to 4.00 / -1.06 / 0.01%/step]
[-4.00 to 4.00 / -0.27 / 0.01%/step]
Adjusts the duplex motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
Adjusts the duplex motor speed.
[-4.00 to 4.00 / 0.41 / 0.01%/step]
[-4.00 to 4.00 / 1.21 / 0.01%/step]
Adjusts the inverter motor speed.
[-4.00 to 4.00 / 1.4 / 0.01%/step]
Service Mode Table
5
153