Ricoh G-P3 Service Manual page 118

SC
Symptom
[Level]
in Slot 1 on the controller is
incorrect.
IEEE1394 interface error
851
The 1394 interface is
[B]
unusable.
Wireless LAN or Bluetooth card not detected at starting communication
The wireless LAN or Bluetooth
853
card is not detected before
[B]
communication is established,
though the wireless LAN or
Bluetooth board is detected.
Wireless LAN or Bluetooth card not detected during operation
The wireless LAN or Bluetooth
854
card is not detected after
[B]
communication is established,
though the wireless LAN or
Bluetooth board is detected.
Wireless LAN or Bluetooth card error
855
An error is detected in the
[B]
wireless LAN or Bluetooth
card.
Wireless LAN or Bluetooth board error
856
An error is detected in the
[B]
wireless LAN or Bluetooth
board.
USB interface error
857
Possible Cause/Required Action
2. Replace the controller board.
• Defective IEEE1394
• Defective controller.
1. Replace the IEEE1394 interface board.
2. Replace the controller.
• Loose connection
1. Check the connection.
2. Insert the wireless LAN or Bluetooth card to its
board.
• Loose connection
1. Check the connection.
2. Insert the wireless LAN or Bluetooth card to its
board.
• Loose connection
• Defective wireless LAN or Bluetooth card
1. Check the connection.
2. Replace the wireless LAN or Bluetooth card.
• Defective wireless LAN or Bluetooth board
• Loose connection
1. Check the connection.
2. Replace the wireless LAN or Bluetooth board.
Service Call Conditions
4
117