Ricoh G-P3 Service Manual page 188

[Trans.Belt Bias] Transfer Belt Current
2357
([Color], Process Speed) Process Speed -> RS: Regular speed
2357 001 [FC/ K]: RS
2357 002 [FC/ M]: RS
2357 003 [FC/ C]: RS
2357 004 [FC/ Y]: RS
[Trans.Belt Bias] Transfer Belt Current
([Color], Process Speed) Process Speed -> LS: Low speed
2358
Adjusts the current that is applied to the transfer belt.
2358 001 [FC/ K]: LS
2358 002 [FC/ M]: LS
2358 003 [FC/ C]: LS
2358 004 [FC/ Y]: LS
[Normal: [K]] Transfer roller current and discharge plate voltage for the image area of
plain paper 1 in B/W mode
(Process Speed, Paper Side, Unit) Process Speed -> RS: Regular speed,
2402
Paper Side: 1st or 2nd
Unit -> T.Roll2: Transfer roller, Separa.: Discharge plate (paper separation)
2402 007 RS: 1st: T. Roll2
2402 008 RS: 1st: Separa.
2402 012 RS: 2nd: T. Roll2
2402 013 RS: 2nd: Separa.
[0 to 60 / 7.5 / 0.1 µA /step]
Adjusts the current that is applied to the transfer belt.
*EGB
[0 to 60 / 17.0 / 0.1 µA /step]
*EGB
*EGB [0 to 60 / 15.0 / 0.1 µA /step]
*EGB
*EGB [0 to 60 / 7.5 / 0.1 µA /step]
*EGB
*EGB [0 to 60 / 6.0 / 0.1 µA /step]
*EGB
Adjusts the transfer roller current.
*EGB
[0 to 100 / 18.3/15.5 (NA/EU) / 0.1 -µA/step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
*EGB [0 to 100 / 18.3/15.3 (NA/EU) / 0.1 -µA /step]
*EGB [0 to 4 / 2.0 / 0.1 -KV/step]
Service Mode Table
5
187