Ricoh G-P3 Service Manual page 246

3611 007 High Vt [C]
3611 008 High Vt [Y]
3611 009 DEV.SetUp: [K]
3611 010 DEV.SetUp [M]
3611 011 DEV.SetUp [C]
3611 012 DEV.SetUp [Y]
[Consume Thresh]
3612
Adjusts the toner consume threshold for the toner density adjustment.
3612 001 Normal: [M]
3612 002 Normal: [C]
3612 003 Normal: [Y]
3612 004 Normal:[K]
3612 005 Low Vt: [K]
3612 006 Low Vt: [M]
3612 007 Low Vt: [C]
3612 008 Low Vt: [Y]
3612 009 DEV.SetUp: [K]
3612 010 DEV.SetUp [M]
3612 011 DEV.SetUp [C]
3612 012 DEV.SetUp [Y]
[Low Resolution] (Threshold, [Color])
SP 3701-001 controls if the pixel count is used in hybrid toner supply mode or not. If this
SP is 'on', it is used if the image coverage ratio for the page is below a threshold value
3701
(if the coverage is above this ratio, then the TD sensor is used). If this SP is 'off', then the
TD sensor is always used.
SP3701-002 to 005 control the threshold values for the image coverage ratio.
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
[1 to 800 / 220 / 1 V/step]
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
[1 to 800 / 250 / 1 V/step]
*EGB
*EGB
*EGB
*EGB
Service Mode Table
5
245