Ipv6_Networkaddr> {Longer_Prefixes} | Ipv6_Prefix_List <List_Name 16>]} | Ipv4 Unicast - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
This example displays the community list name as list1:
DGS-3620-28PC:admin#
Command: create bgp community_list standard list1
Success.
DGS-3620-28PC:admin# config bgp community_list standard list1 add community_set
50000:10 permit
Command: config bgp community_list standard list1 add community_set 50000:10
permit
Success.
DGS-3620-28PC:admin#
Command: show bgp community_list list1
Community List Name: list1
--------------------------------
Type
permit : 50000:10
DGS-3620-28PC:admin#
12-44 show bgp route
Description
This command is used to display route entries in the Border Gateway Protocol (BGP) routing table
Format
show bgp route {[[regexp <desc 80> | inconsistent_as | cidr_only | filter_list <list_name 16>
| route_map <map_name 16> | community {community_set <community_set 80> | local_as |
no_advertise | no_export | internet} {exact_match} | community_list <list_name 16>
{exact_match} | ipaddress <ipaddr> | network <network_address> {longer_prefixes} |
prefix_list <list_name 16>] | ipv6 unicast {[regexp <desc 80> | inconsistent_as | filter_list
<list_name 16> | route_map <map_name 16> | community {community_set
<community_set80> | local_as | no_advertise | no_export | internet} {exact_match} |
community_list <list_name 16> {exact_match} | ipv6_address <ipv6addr> | ipv6_network
<ipv6_networkaddr> {longer_prefixes} | ipv6_prefix_list <list_name 16>]} | ipv4 unicast
{[regexp <desc 80> | inconsistent_as | cidr_only | filter_list <list_name 16> | route_map
<map_name 16> | community {community_set <community_set 80> | local_as |
no_advertise | no_export | internet} {exact_match} | community_list <list_name 16>
{exact_match} | ipaddress <ipaddr> | network <network_address> {longer_prefixes} |
prefix_list <list_name 16>]}]
Parameters
regexp - (Optional) Display routes matching the AS path regular expression.
create bgp community_list standard list1
show bgp community_list list1
: standard
208