D-Link xStack DGS-3620 Reference Manual page 588

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#show ipmc cache
Command: show ipmc cache
IP Multicast Forwarding Table
Multicast
Group
---------------
224.1.1.1
224.1.1.1
224.1.2.3
Total Entries : 3
DGS-3620-28PC:admin#
47-3 show ipmc statistics counter
Description
This command is used to display the received and sent multicast packet statistics counters
according to the message type.
Format
show ipmc statistics counter {igmp | pim | dvmrp} {ipif <ipif_name 12>}
Parameters
igmp - (Optional) Specifies to display both sent and received IGMP packets counters.
pim - (Optional) Specifies to display both sent and received PIM packets counters.
dvmrp - (Optional) Specifies to display both sent and received DVMRP packets counters.
ipif - (Optional) Specifies the IP interface to display.
<ipif_name 12> - Enter the IP interface's name here. This name can be up to 12 characters
long.
Restrictions
None.
Example
This example shows how to display the multicast protocol packets counters on the Switch.
Source
Address/Netmask
----------------------
10.48.74.121/8
20.48.74.25/8
10.48.75.3/8
Upstream
Neighbor
---------------
10.48.75.63
20.48.75.25
10.48.76.6
583
Expire Routing
Time Protocol
------ ---------
30 DVMRP
20 PIM-DM
30 DVMRP