Enable Authorization Attributes; Disable Authorization Attributes - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#show authentication ports 1-3
Command: show authentication ports 1-3
Port Methods
---- -------------- ----------- ----------------------
1 None
2 None
3 None
DGS-3620-28PC:admin#
19-10

enable authorization attributes

Description
This command is used to enable the authorization global state.
Format
enable authorization attributes
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the authorization global state:
DGS-3620-28PC:admin#enable authorization attributes
Command: enable authorization attributes
Success.
DGS-3620-28PC:admin#
19-11

disable authorization attributes

Description
This command is used to disable the authorization global state.
Format
disable authorization attributes
Auth Mode Authentication VLAN(s)
Host-based
Host-based
Host-based
294