D-Link xStack DGS-3620 Reference Manual page 615

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To display IPv6 route(s):
DGS-3620-28PC:admin#show ipv6route
Command: show ipv6route
IPv6 Prefix: ::/0
Next Hop : FEC0::5
Total Entries: 1
DGS-3620-28PC:admin#
49-7 enable ecmp ospf
Description
This command is used to activate the OSPF ECMP function.
Format
enable ecmp ospf
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the OSPF ECMP function:
DGS-3620-28PC:admin# enable ecmp ospf
Command: enable ecmp ospf
Success.
DGS-3620-28PC:admin#
49-8 disable ecmp ospf
Description
This command is used to disable the OSPF ECMP function.
Protocol: Static
IPIF : System
610
Metric: 1