D-Link xStack DGS-3620 Reference Manual page 558

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To display all the IGMP snooping static groups:
DGS-3620-28PC:admin#show igmp_snooping static_group
Command: show igmp_snooping static_group
VLAN ID/Name
---------------------------------------
1/default
Total Entries : 1
DGS-3620-28PC:admin#
44-15 show igmp_snooping statistic counter
Description
This command is used to display the IGMP snooping statistics counter for IGMP protocol packets
that are transmitted or received by the switch since IGMP snooping was enabled.
Format
show igmp_snooping statistic counter [vlan <vlan_name 32> | vlanid <vlanid_list> | ports
<portlist>]
Parameters
vlan - Specifies a VLAN to be displayed.
<vlan_name 32> - Enter the VLAN name. The maximum length is 32 characters.
vlanid - Specifies a list of VLANs to be displayed.
<vlanid_list> - Enter the VLAN ID list.
ports – Specify a list of ports to be displayed.
<portlist> - Enter a list of ports.
Restrictions
None.
Example
To display the IGMP snooping statistics counter for port 1:
DGS-3620-28PC:admin#show igmp_snooping statistic counter ports 1
Command: show igmp_snooping statistic counter ports 1
Port #
--------------------------------------------------
Group Number
: 1
: 0
IP Address Static Member Ports
-------------- --------------------
239.1.1.1 9-10
553