D-Link xStack DGS-3620 Reference Manual page 935

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Success.
DGS-3620-28PC:admin#
80-9 create pim crp group
Description
This command is used to add a multicast group range into a C-RP serve list for PIM-SM.
Format
create pim crp group <network_address> rp <ipif_name 12>
Parameters
group - Specifies the multicast group address for this Switch to become a Candidate RP. This
address must be a class D address.
<network_address> - Enter the group network address used here.
rp - Specifies that the interface will act as C-RP for the group.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add a multicast group range into a C-RP server list:
DGS-3620-28PC:admin# create pim crp group 224.1.2.3/32 rp System
Command: create pim crp group 224.1.2.3/32 rp System
Success.
DGS-3620-28PC:admin#
80-10 delete pim crp group
Description
This command is used to delete a multicast group range from the C-RP server list.
Format
delete pim crp group <network_address>
Parameters
group - Specifies the multicast group address for this switch to be removed from being a
Candidate RP. This address must be a class D address.
<network_address> - Enter the multicast group network address used here.
930