D-Link xStack DGS-3620 Reference Manual page 977

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
<max_lock_no 0-3328> - Enter the value between 0 and 3328.
no_limit - Specifies the default value is no limit.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the maximum number of entries that can be learned at 64:
DGS-3620-28PC:admin#config port_security vlan vlanid 1 max_learning_addr 64
Command: config port_security vlan vlanid 1 max_learning_addr 64
Success.
DGS-3620-28PC:admin#
83-4 delete port_security_entry
Description
This command is used to delete a port security entry by VLAN, VLAN ID, and MAC address.
Format
delete port_security_entry [vlan <vlan_name 32> | vlanid <vlanid 1-4094>] mac_address
<macaddr>
Parameters
vlan - Specifies the VLAN by name.
<vlan_name 32> - Enter the VLAN name. The maximum length is 32 characters.
vlanid - Specifies a list of VLANs by VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID. This value must be between 1 and 4094.
mac_address - Specifies the MAC address of the entry.
<macaddr> - Enter the MAC address of the entry.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete the port security entry with a MAC address of 00-01-30-10-2c-c7 on the default VLAN:
DGS-3620-28PC:admin#delete port_security_entry vlan default mac_address 00-01-
30-10-2C-C7
Command: delete port_security_entry vlan default mac_address 00-01-30-10-2C-C7
Success.
DGS-3620-28PC:admin#
972