D-Link xStack DGS-3620 Reference Manual page 819

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
<Function Key>
Ctrl+C Quit without save
Ctrl+W Save and quit
-------------------------------------------------------------------------------
70-2 show greeting_message
Description
This command is used to display the currently configured greeting message on the switch.
Format
show greeting_message
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To display the currently configured greeting message:
<Control Key>
left/right/
up/down Move cursor
Ctrl+D Delete line
Ctrl+X Erase all setting
Ctrl+L Reload original setting
814