Enable Ospf - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#show ospf virtual_link
Command: show ospf virtual_link
Virtual Interface Configuration
Transit
Area ID
--------------- --------------- -------- -------- -------------- ------
4.4.4.4
4.4.4.4
Total Entries : 2
DGS-3620-28PC:admin#
76-19

enable ospf

Description
This command is used to enable OSPF on the switch.
Format
enable ospf
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable OSPF on the switch:
DGS-3620-28PC:admin# enable ospf
Command: enable ospf
Success.
DGS-3620-28PC:admin#
76-20 show ospf
Description
This command is used to display the current OSPF settings on the switch.
Virtual Hello
Neighbor Router Interval Interval
1.1.1.1 10
6.6.6.6 10
Dead Authentication Link
60 MD5
250 Simple
888
Status
Up
Down