D-Link xStack DGS-3620 Reference Manual page 754

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To show the information of the loopback interface named loopback1:
DGS-3620-28PC:admin#show loopback ipif loopback1
Command: show loopback ipif loopback1
Loopback Interface
Interface Admin State
IPv4 Address
Total Entries
DGS-3620-28PC:admin#
62-4 delete loopback ipif
Description
This command is used to delete a loopback interface.
Format
delete loopback ipif [<ipif_name 12> | all]
Parameters
<ipif_name 12> - Enter the IP interface name used for this configuration here. This name can be
up to 12 characters long.
all – Specifies that all the IP loopback interfaces will be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete the loopback interface named loopback1:
DGS-3620-28PC:admin# delete loopback ipif loopback1
Command: delete loopback ipif loopback1
Success.
DGS-3620-28PC:admin#
: loopback1
: Enabled
: 192.168.69.1/24 (Manual)
: 1
749