D-Link xStack DGS-3620 Reference Manual page 214

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
<desc 80> - A regular expression to match the BGP AS paths, must enclose in the quotes.
Can include blank space. The string can be up to 80 characters long.
inconsistent_as - (Optional) Display the routes if they have of same prefix and different AS path
originate.
cidr_only - (Optional) Display only routes with non-natural network masks.
filter_list - (Optional) Display routes conforming to the filter list.
<list_name 16> - Enter the filter list name here. This name can be up to 16 characters long.
route_map - (Optional) Display routes matching the route map.
<map_name 16> - Enter the route map name here. This name can be up to 16 characters
long.
community - (Optional) Display routes matching the communities.
community_set - (Optional) Specifies the community set here.
<community_set 80> - Enter the community set here. This value can be up to 80 characters
long.
local_as - (Optional) Do not send outside local AS (well-known community).
no_advertise - (Optional) Do not advertise to any peer (well-known community).
no_export - (Optional) Do not export to next AS (well-known community).
internet - (Optional) Send to the Internet (well-known community>.
exact_match - (Optional) If specified, communities.need to match exactly.
community_list - (Optional) A community is in the form of <as_number> : <udn_number>. A
community string can be formed by multiple communities, separated by a comma.
<list_name 16> - Enter the community list name here. This name can be up to 16 characters
long.
exact_match - (Optional) If specified, communities.need to match exactly.
ipaddress - (Optional) Display the host route that matches the specified IP address.
<ipaddr> - Enter the IP address to be displayed here.
network - (Optional) Display the route that matches the specified network address.
<network_address> - Enter the network address to be displayed here.
longer_prefixes - (Optional) If specified, more specific routes will be also displayed.
prefix_list - (Optional) Display routes conforming to the prefix list
<list_name 16> - Specifies the list name for the specified prefix list, IP access list, or route
map.
ipv6 unicast - Specifies to display routes for the IPv6 unicast address family.
ipv6address - (Optional) Display the host route that matches the specified IPv6 address.
<ipv6addr> - Enter the IPv6 address to be displayed here.
ipv6_network - (Optional) Display the route that matches the specified IPv6 network address.
<ipv6_networkaddr> - Enter the IPv6 network address to be displayed here.
ipv6_prefix_list - Displays routes conforming to the IPv6 prefix list.
<list_name 16> - Enter the IPv6 prefix list name here. This name can be up to 16 characters
long.
ipv4 unicast - Specifies to display routes for the IPv4 unicast address family.
Restrictions
None. (EI Mode Only Command)
Example
The following example shows how to get the BGP route information:
DGS-3620-28PC:admin#
Command: show bgp route
BGP local router ID is 10.0.40.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? – incomplete
show bgp route
209