D-Link xStack DGS-3620 Reference Manual page 425

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
24-10 delete filter dhcpv6_server permit sip
Description
This command is used to delete a filter DHCPv6 server permit entry.
Format
delete filter dhcpv6_server permit sip <ipv6addr>
Parameters
<ipv6addr> - Enter the source IPv6 address of the entry here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete permit entry from the filter DHCPv6 server forward list:
DGS-3620-28PC:admin#delete filter dhcpv6_server permit sip 2200::4
Command: delete filter dhcpv6_server permit sip 2200::4
Success.
DGS-3620-28PC:admin#
24-11 create filter icmpv6_ra_all_node permit sip
Description
This command is used to create a filter ICMPv6 RA All-nodes permit entry.
Format
create filter icmpv6_ra_all_node permit sip <ipv6addr> ports [<portlist> | all]
Parameters
<ipv6addr> - Enter the source address of entry which will be created into the Filter ICMPv6 RA
All-nodes forward list here.
state - Specifies whether the port's filter DHCPv6 server function is enabled or disabled.
enable - Specifies that the filter option is enabled.
disable - Specifies that the filter option is disabled.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
420