D-Link xStack DGS-3620 Reference Manual page 786

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the MLD proxy:
DGS-3620-28PC:admin#disable mld_proxy
Command: disable mld_proxy
Success.
DGS-3620-28PC:admin#
67-3 config mld_proxy downstream_if
Description
This command configures the MLD proxy downstream interfaces. The MLD proxy plays the server
role on the downstream interfaces. The downstream interface must be an MLD Snooping enabled
VLAN.
Format
config mld_proxy downstream_if [add | delete] vlan [<vlan_name 32> | vlanid <vidlist>]
Parameters
add - Specifies to add a downstream interface.
delete - Specifies to delete a downstream interface .
vlan - Specifies the VLAN by name or ID.
<vlan_name 32> - Enter a name of VLAN which belong to the MLD proxy downstream
interface. The maximum length is 32 characters.
vlanid - Specifies a list of VLAN IDs which belong to the MLD proxy downstream interface.
<vidlist> - Enter a list of VLAN IDs which belong to the MLD proxy downstream interface.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the MLD Proxy's downstream interface:
DGS-3620-28PC:admin#config mld_proxy downstream_if add vlan vlanid 2-7
Command: config mld_proxy downstream_if add vlan vlanid 2-7
781