D-Link xStack DGS-3620 Reference Manual page 981

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#config port_security log state enable
Command: config port_security log state enable
Success.
DGS-3620-28PC:admin#
83-9 config port_security trap state
Description
This command is used to enable or disable the port security trap.
Format
config port_security trap state [enable | disable]
Parameters
enable - Specifies to enable the port security trap.
disable - Specifies to disable the port security trap.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the port security trap:
DGS-3620-28PC:admin#config port_security trap state enable
Command: config port_security trap state enable
Success.
DGS-3620-28PC:admin#
976