D-Link xStack DGS-3620 Reference Manual page 684

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
create jwac user <username 15> {vlan <vlanid 1-4094>}
Parameters
<username 15> - Enter the user name to be created.
vlan - (Optional) Specifies the target VLAN ID for the authenticated host which uses this user
account to pass authentication.
<vlanid 1-4094> - Enter the target VLAN ID for the authenticated host which uses this user
account to pass authentication. The VLAN ID value must be between 1 and 4094.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a JWAC user in the local DB:
DGS-3620-28PC:admin# create jwac user 112233
Command: create jwac user 112233
Enter a case-sensitive new password:***
Enter the new password again for confirmation:***
Success.
DGS-3620-28PC:admin#
53-20 config jwac user
Description
This command configures a JWAC user.
Format
config jwac user <username 15> {vlan <vlanid 1-4094>}
Parameters
<username 15> - Enter the user name to be configured.
vlan - (Optional) Specifies the target VLAN ID for the authenticated host which uses this user
account to pass authentication.
<vlanid 1-4094> - Enter the target VLAN ID for the authenticated host which uses this user
account to pass authentication. The VLAN ID value must be between 1 and 4094.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
679