D-Link xStack DGS-3620 Reference Manual page 424

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the filter DHCPv6 server trap state:
DGS-3620-28PC:admin#config filter dhcpv6_server trap enable
Command: config filter dhcpv6_server trap enable
Success.
DGS-3620-28PC:admin#
24-9 show filter dhcpv6_server
Description
This command is used to display the filter DHCPv6 server information.
Format
show filter dhcpv6_server
Parameters
None.
Restrictions
None.
Example
To display filter DHCPv6 server information:
DGS-3620-28PC:admin#show filter dhcpv6_server
Command: show filter dhcpv6_server
Enabled ports:1:1-1:8
Trap State: Enabled
Log State: Enabled
Permit Source Address Table:
Source IP Address
---------------------------------------
2200::5
Total Entries:1
DGS-3620-28PC:admin#
Port
---------------
1:5
419