Clear Log; Show Log - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
74-7

clear log

Description
This command is used to clear the switch's history log.
Format
clear log
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To clear the switch's history log:
DGS-3620-28PC:admin#clear log
Command: clear log
Success
DGS-3620-28PC:admin#
74-8

show log

Description
This command is used to display the switch history log.
Format
show log {[index <value_list> | severity {module <module_list>} {emergency | alert | critical |
error | warning | notice | informational | debug | <level_list 0-7>} | module <module_list>]}
Parameters
index - (Optional) Specifies to display the history log between two values.
<value_list> - Enter to display the history log between two values. For example, show log
index 1-5 will display the history log from 1 to 5.
severity - (Optional) Specifies the severity level: emergency, alert, critical, error, warning, notice,
informational, or debug.
module – (Optional) Specify the modules to be displayed. The module can be obtained by the
show log_software_module command. Use commas to separate multiple modules.
<module_list> - Enter the modules to be displayed.
emergency - (Optional) Specifies severity level 0.
alert - (Optional) Specifies severity level 1.
critical - (Optional) Specifies severity level 2.
851