Disable Telnet; Enable Web - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
2-17

disable telnet

Description
This command is used to disable Telnet.
Format
disable telnet
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable Telnet:
DGS-3620-28PC:admin#disable telnet
Command: disable telnet
Success.
DGS-3620-28PC:admin#
2-18

enable web

Description
This command is used to enable Web UI and configure the port number. The default setting is
enabled and the port number is 80.
Format
enable web {<tcp_port_number 1-65535>}
Parameters
<tcp_port_number 1-65535> - (Optional) Specifies the TCP port number. TCP ports are
numbered between 1 and 65535. The "well-know" TCP port for the Web protocol is 80.
Restrictions
Only Administrators and Operators can issue this command.
22