D-Link xStack DGS-3620 Reference Manual page 825

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
show mld group {ipif <ipif_name 12> | group <ipv6addr>}
Parameters
ipif – (Optional) Specifies the IP interface name used for this configuration.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
group - (Optional) Specifies the IPv6 multicast group address used.
<ipv6addr> - Enter the IPv6 multicast group address used here.
If no parameter is specified, the system will display all MLD configurations.
Restrictions
None.
Example
To display all the MLD group member information on the switch, the "Expiry" uses second as the
unit:
DGS-3620-28PC:admin# show mld group
Command: show mld group
Interface Multicast Group
------------ -----------------
System
n10
n20
n10
Total Entries : 4
DGS-3620-28PC:admin#
To display all the MLD group member information of interface "n10", the "Expiry" uses second as
the unit:
DGS-3620-28PC:admin# show mld group ipif n10
Command: show mld group ipif n10
Interface Multicast Group
------------ ------------------
n10
n10
Total Entries : 2
DGS-3620-28PC:admin#
-----
FF1E::100:0:0:20
FF1E::1001:1234
FF1E::2AC4:0:452
FF1E::5A3D:11:23C1
FF1E::1001:1234
FF1E::5A3D:11:23C1
Expiry
260
255
260
260
Expiry
-----
255
260
820