D-Link xStack DGS-3620 Reference Manual page 979

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To display a port security entry:
DGS-3620-28PC:admin#show port_security_entry
Command: show port_security_entry
MAC Address
-----------------
00-00-00-00-00-01
Total Entry Number: 1
DGS-3620-28PC:admin#
83-7 show port_security
Description
This command is used to display the port security related information of the switch ports including
the port security admin state, the maximum number of learning addresses, and the lock mode.
Format
show port_security {ports {<portlist>} {[vlan <vlan_name 32> | vlanid <vidlist>]}}
Parameters
ports - (Optional) Specifies a range of ports to be displayed.
<portlist> - Enter a range of ports to be displayed.
vlan - (Optional) Specifies a VLAN to display its configuration.
<vlan_name 32> - Enter the VLAN name. The maximum length is 32 characters.
vlanid - (Optional) Specifies a VLAN list to display the configuration.
<vidlist> - Enter a list of the VLAN IDs.
Restrictions
None.
Example
To display the global configuration of port security:
DGS-3620-28PC:admin#show port_security
Command: show port_security
Port Security Trap State
VID Port Lock Mode
--- ---- ----------
1 25 DeleteOnTimeout
: Disabled
974