D-Link xStack DGS-3620 Reference Manual page 710

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Access : Deny
Profile ID
----------- -----------
1 customer
DGS-3620-28PC:admin#
To display the limited multicast address range on ports 1 and 3:
DGS-3620-28PC:admin#show limited_multicast_addr ports 1,3
Command: show limited_multicast_addr ports 1,3
Port : 1
Access : Deny
Profile ID
----------- -----------
1 customer
Port : 3
Access : Deny
Profile ID
----------- ----------------
1 customer
DGS-3620-28PC:admin#
57-8 config max_mcast_group
Description
This command is used to configure the maximum number of multicast groups a port or VLAN can
join. If the IPv4 or IPv6 option is not specified, IPv4 is implied. When the joined groups for a port or
a VLAN have reached the maximum number, the newly learned group will be dropped if the action
is specified as drop. The newly learned group will replace the oldest group if the action is specified
as replace.
Format
config max_mcast_group [ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]} {max_group
[<value 1-1024> | infinite] | action [drop | replace]} (1)
Parameters
ports - Specifies a range of ports to configure the maximum multicast group.
<portlist> - Enter a range of ports to be configured.
vlanid - Specifies the VLAN ID to configure the maximum multicast group.
<vlanid_list> - Enter the VLAN ID of the VLAN here.
Name
Name
Name
Multicast Addresses
-----------------------------
224.19.62.34 – 224.19.162.200
Multicast Addresses
-----------------------------
224.19.62.34 – 224.19.162.200
Multicast Addresses
-----------------------------
224.19.62.34 – 224.19.162.200
705