D-Link xStack DGS-3620 Reference Manual page 288

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#show route redistribute dst rip
Command: show route redistribute dst rip
Route Redistribution Settings
Source Destination
Protocol Protocol
-------- ------------
OSPF RIP
STATIC RIP
LOCAL RIP
Total Entries : 3
DGS-3620-28PC:admin#
18-12 delete route redistribute dst bgp src
Description
This command is used to delete the route redistribute configuration on the Switch. It specifies to
not redistribute other routing protocols to BGP.
Format
delete route redistribute dst bgp src [local | static | rip | ospf]
Parameters
src - Specifies the source protocol.
local - To not redistribute local routes.
static - To not redistribute static routes.
rip - To not redistribute RIP routes.
ospf - To not redistribute OSPF routes.
Restrictions
Only Administrators, Operators and Power-Users can issue this command. (EI Mode Only
Command)
Example
To delete route redistribution settings:
DGS-3620-28PC:admin#delete route redistribute dst bgp src static
Command: delete route redistribute dst bgp src static
Success.
DGS-3620-28PC:admin#
Type Metric
-------- ------
ExtType2 3
All 5
All 4
283
RouteMapName
------------
N/A
N/A
N/A