D-Link xStack DGS-3620 Reference Manual page 476

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin# delete host_name www.example.com
Command: delete host_name www.example.com
Success.
DGS-3620-28PC:admin#
31-7 show host_name
Description
This command is used to display the current host name.
Format
show host_name {static | dynamic}
Parameters
static – (Optional) Specifies to display the static host name entries.
dynamic – (Optional) Specifies to display the dynamic host name entries.
Restrictions
None.
Example
To display the static and dynamic host name entries:
DGS-3620-28PC:admin#show host_name
Command: show host_name
Static Host Name Table
Host Name : www.example1.com
IP Address : 20.20.20.20
IPv6 Address : 3000::1
Host Name : www.example2.com
IP Address : 10.10.10.10
IPv6 Address : 1000::1
Host Name : www.example3.com
IP Address : 4.4.4.4
Host Name : www.example4.com
IPv6 Address : 4000::1
Total Static Entries:
Dynamic Host Name Table
4
471