D-Link xStack DGS-3620 Reference Manual page 366

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
If the input module list is empty, the states of all registered modules which support debug module
will be shown.
Format
debug show status {module <module_list>}
Parameters
module – (Optional) Specifies the module list.
<module_list> - Enter the module list here.
Restrictions
Only Administrator-level users can issue this command.
Example
To show the specified module's debug state:
Prompt# debug show status module MSTP
Command: debug show status module MSTP
Debug Global State
MSTP
Prompt#
To show the debug state:
Prompt# debug show status
Command: debug show status
Debug Global State: Enable
MSTP
IMPB
DHCPv6_CLIENT
DHCPv6_RELAY
OSPFV2
VRRP
RIPNG
ERPS
DHCPv6_SERVER
Prompt#
20-77 debug super_vlan state
Description
This command is used to enable or disable the super VLAN Debug Function.
: Enable
: Enable
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
361