D-Link xStack DGS-3620 Reference Manual page 894

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
show ospf {[ipif <ipif_name 12> | all]}
Parameters
ipif - (Optional) Specifies the IP interface name.
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters
long.
all - (Optional) Specifies that all the IP interfaces will be displayed.
If no parameter is specified, the system will display the current OSPF settings.
Restrictions
None.
Example
To display the current OSPF state:
DGS-3620-28PC:admin# show ospf
Command: show ospf
OSPF Router ID : 10.90.90.90 (Auto selected)
State : Enabled
OSPF Interface Settings
Interface IP Address
------------ ------------------ --------------- -------- --------- ---------
System 10.90.90.90/8
Total Entries : 1
OSPF Area Settings
Area ID Type
--------------- ------ ----------------------- ----------------- ---------
0.0.0.0 Normal None
10.0.0.0 Normal None
10.0.0.1 NSSA
10.0.0.2 Stub
Total Entries : 4
Virtual Interface Configuration
Transit Virtual
Area ID Neighbor Router Interval Interval
--------------- --------------- -------- -------- -------------- ------
10.0.0.0 10.0.0.1
Area ID
0.0.0.0
Stub Import Summary LSA Stub Default Cost Translate
Enabled
Enabled
Hello Dead
10 60
889
State Link
Status
Disabled Link Down 1
None None
None None
1 Disabled
1 None
Authentication Link
Status
None Down
Metric