D-Link xStack DGS-3620 Reference Manual page 830

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin# show nlb fdb
Command: show nlb fdb
MAC Address
----------------- ----------
02-bf-01-01-01-01
02-bf-01-01-01-02
03-bf-01-01-01-01
03-bf-01-01-01-01
Total Entries : 4
DGS-3620-28PC:admin#
72-5 create nlb unicast_fdb
Description
This command is used to create the NLB unicast FDB entry.
Format
create nlb unicast_fdb <macaddr>
Parameters
<macaddr> - Enter the MAC address of the NLB unicast FDB entry to be created.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create an NLB unicast MAC forwarding entry, for the product that support the VLAN information
on the unicast forwarding:
DGS-3620-28PC:admin#create nlb unicast_fdb 02-bf-01-01-01-01
Command: create nlb unicast_fdb 02-BF-01-01-01-01
Success.
DGS-3620-28PC:admin#
72-6 config nlb unicast_fdb
Description
This command is used to add or delete the forwarding ports for the specified NLB unicast FDB
entry.
VLAN ID Egress Ports
----------------------------------
- 1:1-1:5,1:26,2:26
- 1:1-1:5,1:26,2:26
100 1:1-1:5,1:26,2:26
1 1:1-1:5,1:26,2:26
825